Technical Specifications
Detailed technical parameters and performance data for all product lines
Timing Belts Specifications
| Parameter | Specification |
|---|---|
| Pitch Types | MXL, XL, L, H, XH, XXH, T2.5, T5, T10, AT5, AT10 |
| Width Range | 6mm - 150mm |
| Material | Neoprene / Polyurethane with steel or fiberglass cords |
| Temperature Range | -30°C to +100°C |
| Maximum Speed | 80 m/s |
| Transmission Efficiency | Up to 98% |
| Tensile Strength | Up to 3000 N/cm width |
Typical Applications
- Precision positioning systems
- Robotics and automation
- CNC machinery
- Printing equipment
- Textile machines
Download Complete Datasheet
Download the comprehensive PDF datasheet with detailed specifications, installation guidelines, and maintenance recommendations.
Installation Guidelines
Pre-Installation
- 1.Inspect all components for damage before installation
- 2.Clean pulleys and remove any debris or old belt residue
- 3.Verify correct pulley alignment (max 0.5° deviation)
- 4.Check shaft parallelism and bearing condition
Installation Steps
- 1.Loosen motor base or tensioning device
- 2.Install belt without forcing or prying
- 3.Apply proper tension using tension gauge
- 4.Run-in at reduced load for 15-30 minutes
Maintenance Recommendations
| Interval | Inspection Item | Action Required |
|---|---|---|
| Daily | Visual inspection, unusual noise | Check for wear, cracks, or glazing |
| Weekly | Belt tension check | Adjust tension if necessary |
| Monthly | Pulley alignment verification | Realign if deviation exceeds tolerance |
| Annually | Complete system inspection | Replace worn components, re-tension all belts |
Download Center
Access comprehensive technical documentation and resources